[1] Taheri Shakib, J. and Jalalifar, H., 2012. Effect of hydraulic fracture on the fractured reservoir based on the connection with natural fractures. Journal of Chemical and Petroleum Engineering, 46(2): 123-133.
[2] Khanal, A., Weijermars, R., 2020. Comparison of flow solutions for naturally fractured reservoirs using Complex Analysis Methods (CAM) and Embedded Discrete Fracture Models (EDFM): Fundamental design differences and improved scaling method. Geofluids 2020, 1-20.
[3] Arias Ortiz, D.A., Klimkowski, L., Finkbeiner, T. and Patzek, T.W., 2021. The effect of hydraulic fracture geometry on well productivity in shale oil plays with high pore pressure. Energies, 14(22), p.7727.
[4] Liu, J., Zhou, Y. and Chen, J., 2021. A Two-Dimensional Partitioning of Fracture–Matrix Flow in Fractured Reservoir Rock Using a Dual-Porosity Percolation Model. Energies, 14(8): 2209.
[5] Dawei, Z., Yongle, H., Mingyue, C., Yandong, C., LIANG, C., Wenxin, C., Yanhui, H., Xiaoyong, W., Hui, C., Xiang, L., 2020. Productivity simulation of hydraulically fractured wells based on hybrid local grid refinement and embedded discrete fracture model. Petroleum Exploration and Development 47, 365-373.
[6] Xie, H., Torres, M.F., Cheng, P., Yu, W., Xin, Y., Miao, J. and Cheng, M., 2022. A new-generation Embedded Discrete Fracture Model calibration workflow applied to the characterization of complex naturally fracture reservoir. Petroleum Research, 7(1), pp.1-12.
[7] Xu, J., Sun, B. and Chen, B., 2019. A hybrid embedded discrete fracture model for simulating tight porous media with complex fracture systems. Journal of Petroleum Science and Engineering, 174, pp.131-143.
[8] Zeng, Q., Yao, J. and Shao, J., 2020. An extended finite element solution for hydraulic fracturing with thermo-hydro-elastic–plastic coupling. Computer Methods in Applied Mechanics and Engineering, 364, p.112967.
[9] Geng, S., Li, C., Zhai, S., Gong, Y. and Jing, M., 2023. Modeling the mechanism of water flux in fractured gas reservoirs with edge water aquifers using an embedded discrete fracture model. Journal of Energy Resources Technology, 145(3), p.033002.
[10] Dong, Y., Zeng, B., Song, Y., Zhou, X., Li, P. and Zhang, F., 2023. Numerical Study of Hydraulic Fracture Propagation in Orthotropic Shale Reservoirs by Using the XFEM. Energy & Fuels.
[11] Pezzulli, E., Nejati, M., Salimzadeh, S., Matthäi, S.K. and Driesner, T., 2022. Finite element simulations of hydraulic fracturing: A comparison of algorithms for extracting the propagation velocity of the fracture. Engineering Fracture Mechanics, 274, p.108783.
[12] Paluszny, A., Salimzadeh, S. and Zimmerman, R.W., 2018. Finite-element modeling of the growth and interaction of hydraulic fractures in poroelastic rock formations. In Hydraulic Fracture Modeling (pp. 1-19). Gulf Professional Publishing.
[13] Zhang, B., Guo, T., Qu, Z., Wang, J., Chen, M. and Liu, X., 2023. Numerical simulation of fracture propagation and production performance in a fractured geothermal reservoir using a 2D FEM-based THMD coupling model. Energy, 273, p.127175.
[14] Zhang, Y., Hou, S., Mei, S., Zhao, Y. and Li, D., 2023. Finite volume method-based numerical simulation method for hydraulic fracture initiation in rock around a perforation. Journal of Zhejiang University-SCIENCE A, 24(1), pp.56-63.
[15] Cheng, S., Zhang, M., Chen, Z. and Wu, B., 2022. Numerical study of simultaneous growth of multiple hydraulic fractures from a horizontal wellbore combining dual boundary element method and finite volume method. Engineering Analysis with Boundary Elements, 139, pp.278-292.
[16] Yang, C.X., Yi, L.P., Yang, Z.Z. and Li, X.G., 2022. Numerical investigation of the fracture network morphology in multi-cluster hydraulic fracturing of horizontal wells: A DDM-FVM study. Journal of Petroleum Science and Engineering, 215, p.110723.
[17] Wang, S., Yu, X., Winterfeld, P.H. and Wu, Y.S., 2023. Real-Time Simulation of Hydraulic Fracturing Using a Combined Integrated Finite Difference and Discontinuous Displacement Method: Numerical Algorithm and Field Applications. Water, 15(5), p.938.
[18] Prieto, M., Aristizabal, J.A., Pradilla, D. and Gómez, J.M., 2022. Simultaneous numerical simulation of the hydraulic fractures geometry in multi-stage fracturing for horizontal shale gas wells. Journal of Natural Gas Science and Engineering, 102, p.104567.
[19] Reddy, J.N. and Gartling, D.K., 2010. The finite element method in heat transfer and fluid dynamics. CRC press.
[20] Mi, L., Jiang, H., Li, J., Li, T., Tian, Y., 2014. The investigation of fracture aperture effect on shale gas transport using discrete fracture model. Journal of Natural Gas Science and Engineering 21, 631-635.
[21] Zhang, J., Mu, L., Jin, J. and Li, X., 2018. A computational method of productivity forecast of a multi-angle fractured horizontal well using the discrete fracture model. AIP Advances, 8(7): 075201.
[22] Ozkan, E., Brown, M., Raghavan, R., Kazemi, H., 2011. Comparison of fractured-horizontal-well performance in tight sand and shale reservoirs. SPE Reservoir Evaluation & Engineering 14, 248-259.
[23] Wang, H. (2018). Discrete fracture networks modeling of shale gas production and revisit rate transient analysis in heterogeneous fractured reservoirs. Journal of Petroleum Science and Engineering, 169, 796-812.
[24] Zhao, Y.l., Liu, L.f., Zhang, L.-h., Zhang, X.Y., Li, B., 2019. Simulation of a multistage fractured horizontal well in a tight oil reservoir using an embedded discrete fracture model. Energy Science & Engineering 7, 1485-1503.
[25] Cao M, Zheng S, Elliott B, Sharma MM. A novel integrated DFN-fracturing-reservoir model: A case study. Rock Mechanics and Rock Engineering. 2023 Jan 27:1-5
[26] Cao, M. and Sharma, M.M., 2023. A computationally efficient model for fracture propagation and fluid flow in naturally fractured reservoirs. Journal of Petroleum Science and Engineering, 220, p.111249.
[27] Ranjbar, A., Izadpanahi, A. and Ebrahimi, A., 2022. Numerical analysis of geomechanical behavior of fractures and faults in a deformable porous medium. Journal of Petroleum Exploration and Production Technology, 12(11), pp.2955-2966.
[28] RANJBAR, A., Izadpanahi, A., Ebrahimi, A. (2021). 'Numerical Analysis of Fluid Flow in a Deformable Porous Medium Using Finite Element Method', Journal of Oil, Gas and Petrochemical Technology, 8(Number 2), pp. 47-59. doi: 10.22034/jogpt.2022.277932.1094
[29] Ranjbar, A., Hassani, H., Shahriar, K. and Shahrabi, M.J.A., 2020. Thermo-hydro-mechanical modeling of fault discontinuities using zero-thickness interface element. Journal of Rock Mechanics and Geotechnical Engineering, 12(1), pp.74-88.
[30] Iranmanesh, M.A. and Pak, A., 2023. Three-dimensional numerical simulation of hydraulically driven cohesive fracture propagation in deformable reservoir rock using enriched EFG method. Computational Geosciences, 27(2), pp.317-335.
[31] Ahmadi, Y. (2021). 'Relationship between Asphaltene Adsorption on the Surface of Nanoparticles and Asphaltene Precipitation Inhibition During Real Crude Oil Natural Depletion Tests', Iranian Journal of Oil and Gas Science and Technology, 10(3), pp. 69-82. doi: 10.22050/ijogst.2021.136325
[32] Mansouri, M., Ahmadi, Y. and Jafarbeigi, E., 2022. Introducing a new method of using nanocomposites for preventing asphaltene aggregation during real static and dynamic natural depletion tests. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 44(3), pp.7499-7513.
[33] Mansouri, M., Parhiz, M., Bayati, B., Ahmadi, Y. (2021). 'Preparation of Nickel Oxide Supported Zeolite Catalyst (NiO/Na-ZSm-5) for Asphaltene Adsorption: A Kinetic and Thermodynamic Study', Iranian Journal of Oil and Gas Science and Technology, 10(2), pp. 63-89. doi: 10.22050/ijogst.2021.257740.1571
[34] Ahmadi, Y. (2023). 'Improving Fluid Flow Through Low Permeability Reservoir in the presence of Nanoparticles: An Experimental Core Fooding WAG Tests', Iranian Journal of Oil and Gas Science and Technology, 12(2), pp. -. doi: 10.22050/ijogst.2021.287297.1595
[35] Jafarbeigi, E., Ahmadi, Y., Mansouri, M. and Ayatollahi, S., 2022. Experimental core flooding investigation of new ZnO− γAl2O3 nanocomposites for enhanced oil recovery in carbonate reservoirs. ACS omega, 7(43), pp.39107-39121.
[36] Ahmadi, Y., Mansouri, M. and Jafarbeigi, E., 2022. Improving simultaneous water alternative associate gas tests in the presence of newly synthesized γ-Al2O3/ZnO/Urea nano-composites: An experimental core flooding tests. ACS omega, 8(1), pp.1443-1452.
[37] COMSOL, 2013. Multiphysics Model Library, Earth Science Module, Version 4.3a. COMSOL.
[38] Yang, S., Wei, J., 2004. Reservoir physics. Beijing: Petroleum Industry Press, Chinese, 136-159.
[39] Mahmoud, M., 2014. Development of a new correlation of gas compressibility factor (Z-factor) for high pressure gas reservoirs. Journal of Energy Resources Technology, 136(1), p.012903.
[40] Wang, H., 2018. Discrete fracture networks modeling of shale gas production and revisit rate transient analysis in heterogeneous fractured reservoirs. Journal of Petroleum Science and Engineering, 169, pp.796-812.
[41] Liu, S., Wei, J., Ma, Y., Liu, X. and Yan, B., 2021. Numerical simulation on the effect of fractures geometries for shale gas development with discrete fracture network model. Journal of Petroleum Exploration and Production, 11(3): 1289-1301.
[42] Zeng, Q., Liu, W., Yao, J., Liu, J., 2020. A phase field based discrete fracture model (PFDFM) for fluid flow in fractured porous media. Journal of Petroleum Science and Engineering 191, 107191.
