Journal of Oil, Gas and Petrochemical Technology

Journal of Oil, Gas and Petrochemical Technology

Experimental study on Polymer Flooding in a Heterogeneous Porous Media-Part I: Effects of Copolymer and Silica Nanoparticles Composition

Document Type : Research Paper

Authors
Mehdi Momenian
Mohammad Reza Moghbeli
Forough Ameli
Seyed Hosein Hayatolgheilbi
Smart Polymers and Nanocomposites Reserch Group, School of Chemical Engineering, Petroleum and Gas, Iran University of Science and Technology, Tehran 16846–13114, Iran
10.22034/jogpt.2023.384834.1109
Abstract
In the present study, acrylamide/2-acrylamido-2-methylpropane sulfonic acid (AM/AMPS) copolymers were synthesized for enhanced oil recovery (EOR). The effects of silica nanoparticles (SNPs) on the copolymer solution viscosity and oil recovery factor was investigated. Chemical structure of the copolymers and viscosity of the resultant aqueous solutions were determined using Fourier-transform Infrared (FTIR) spectrometer and an Ostwald viscometer, respectively. The functionality of the AMP55 copolymer in polymer injection test was studied using a glass micromodel. Oil recovery factor of 62.3% was obtained for injection of AMP55 copolymer. Additionally, the effect of SNPs on the solution viscosity and oil sweeping efficiency was studied. For this purpose, various amounts of SNPs (1, 2, and 3 wt.%) were added to the solutions with different AMP55 concentrations. Rheological results showed that incorporation of 2 wt.% of SNPs resulted in maximum viscosity of 42.8cs. Injection test results indicated that introduction of the 2 wt.% SNPs in the AMP55 solution enhanced the sweeping efficiency (71.7%) and recovery factor 15% and 400%, compared to the SNPs free copolymer solution and water flooding, respectively. The experiments led to proper selection of the synthesized copolymer structure and SNPs content in its solution, to attain the maximum viscosity and oil sweeping efficiency.
Keywords
AM/AMPS
Enhanced Oil Recovery
Copolymer
Silica nanoparticle
Glass Micromodel
  1. Sorbie, K.S., Polymer-Improved oil recovery, Blackie and Son Ltd. Glasgow and London, 1991.
  2. Vermolen, E., M. Van Haasterecht, and S. Masalmeh. A systematic study of the polymer visco-elastic effect on residual oil saturation by core flooding. in SPE EOR Conference at Oil and Gas West Asia. 2014. Society of Petroleum Engineers.
  3. Parsa, S. and D. Weitz. Polymer as permeability modifier in porous media for enhanced oil recovery. in APS Meeting Abstracts. 2017.
  4. Al-Saadi, F.S., et al. Polymer Flooding in a large field in South Oman-initial results and future plans. in SPE EOR Conference at Oil and Gas West Asia. 2012. Society of Petroleum Engineers.
  5. Let, M.S., et al. Polymer Flooding a~ 500-cp Oil. in SPE Improved Oil Recovery Symposium. 2012. Society of Petroleum Engineers.
  6. Abou-Kassem, J.H., Screening of oil reservoirs for selecting candidates of polymer injection. Energy sources, 1999. 21(1-2): p. 5-15.
  7. Castagno, R.E., R.D. Shupe, and M.D. Gregory, Method for laboratory and field evaluation of a proposed polymer flood. SPE Reservoir Engineering, 1987. 2(04): p. 452-460.
  8. Chauveteau, G. and N. Kohler. Polymer flooding: The essential elements for laboratory evaluation. in Spe improved oil recovery symposium. 1974. Society of Petroleum Engineers.
  9. Sorbie, K., A. Parker, and P. Clifford, Experimental and theoretical study of polymer flow in porous media. SPE Reservoir Engineering, 1987. 2(03): p. 281-304.
  10. Tong, Z., et al. A study of microscopic flooding mechanism of surfactant/alkali/polymer. in SPE/DOE Improved Oil Recovery Symposium. 1998. Society of Petroleum Engineers.
  11. Yuan, S., et al. Effects of important factors on alkali/surfactant/polymer flooding. in SPE International Oil and Gas Conference and Exhibition in China. 1998. Society of Petroleum Engineers.
  12. Pusch, G., T. Lötsch, and T. Müller, Investigations of the Oil Displacing Efficiency of Suitable Polymer Products in Porous Media: Aspects of Recovery Mechanisms During Polymer Flooding; 16 Tab. 1987: DGMK.
  13. Schneider, F. and W. Owens, Steady-state measurements of relative permeability for polymer/oil systems. Society of Petroleum Engineers Journal, 1982. 22(01): p. 79-86.
  14. Zaitoun, A. and N. Kohler. The role of adsorption in polymer propagation through reservoir rocks. in SPE International Symposium on Oilfield Chemistry. 1987. Society of Petroleum Engineers.
  15. Zaitoun, A. and N. Kohler. Two-phase flow through porous media: effect of an adsorbed polymer layer. in SPE Annual Technical Conference and Exhibition. 1988. Society of Petroleum Engineers.
  16. Wang, J., et al., Interference Optimization of Surfactant/Polymer Flooding and Surfactant Flooding in Daqing Oilfield. Electron. J. Geotech. Eng., 2017. 22(5): p. 1575-1586.
  17. Volokitin, Y., et al. Results of Alkaline-Surfactant-Polymer Flooding Pilot at West Salym Field. in SPE EOR Conference at Oil and Gas West Asia. 2018. Society of Petroleum Engineers.
  18. Bengar, A., et al., Optimized polymer flooding projects via combination of experimental design and reservoir simulation. Petroleum, 2017. 3(4): p. 461-469.
  19. Mohammad Salehi, M., et al., Simulation of polymer flooding in one of the Iranian oil fields. Egyptian Journal of Petroleum, 2017. 26(2): p. 325-330.
  20. Manichand, R.N., et al., Effective propagation of HPAM solutions through the Tambaredjo reservoir during a polymer flood. SPE Production & Operations, 2013. 28(04): p. 358-368.
  21. Thakuria, C., et al. Performance review of polymer flooding in a major brown oil field of Sultanate of Oman. in SPE Enhanced Oil Recovery Conference. 2013. Society of Petroleum Engineers.
  22. Dawson, M., D.P. Yale, and A.P. Kushnick. Experimental and Computational Investigations of Viscous Fingering at High Mobility Contrasts. in SPE Annual Technical Conference and Exhibition. 2012. Society of Petroleum Engineers.
  23. Dong, M., et al. Analysis of immiscible water-alternating-gas (WAG) injection using micromodel. in Canadian International Petroleum Conference. 2002. Petroleum Society of Canada.
  24. Grattoni, C.A. and R.A. Dawe, Gas and oil production from waterflood residual oil: effects of wettability and oil spreading characteristics. Journal of Petroleum Science and Engineering, 2003. 39(3-4): p. 297-308.
  25. Romero, C., J. Alvarez, and A. Müller. Micromodel studies of polymer-enhanced foam flow through porous media. in SPE/DOE improved oil recovery symposium. 2002. Society of Petroleum Engineers.
  26. Sohrabi, M., et al., Visualization of oil recovery by water-alternating-gas injection using high-pressure micromodels. SPE Journal, 2004. 9(03): p. 290-301.
  27. Zhou, W., et al. Application of hydrophobically associating water-soluble polymer for polymer flooding in China offshore heavy oilfield. in International Petroleum Technology Conference. 2007. International Petroleum Technology Conference.
  28. Emami Meybodi, H., R. Kharrat, and M.H. Ghazanfari. Effect of heterogeneity of layered reservoirs on polymer flooding: an experimental approach using 5-spot glass micromodel. in Europec/EAGE conference and exhibition. 2008. Society of Petroleum Engineers.
  29. Zaitoun, A. and G. Chauveteau. Effect of pore structure and residual oil on polymer bridging adsorption. in SPE/DOE Improved Oil Recovery Symposium. 1998. Society of Petroleum Engineers.
  30. Bai, Y., X. Zhang, and G. Zhao, Theoretical analysis of microscopic oil displacement mechanism by viscoelastic polymer solution. Theoretical and Applied Mechanics Letters, 2011. 1(2).
  31. Maghzi, A., et al., The impact of silica nanoparticles on the performance of polymer solution in presence of salts in polymer flooding for heavy oil recovery. Fuel, 2014. 123: p. 123-132.
  32. Yousefvand, H. and A. Jafari, Enhanced oil recovery using polymer/nanosilica. Procedia Materials Science, 2015. 11: p. 565-570.
  33. Xin, H., et al., Synthesis, characterization, and properties of copolymers of acrylamide with sodium 2-acrylamido-2-methylpropane sulfonate with nano silica structure. Colloid and Polymer Science, 2015. 293(5): p. 1307-1316.
  34. Maurya, N.K. and A. Mandal, Studies on behavior of suspension of silica nanoparticle in aqueous polyacrylamide solution for application in enhanced oil recovery. Petroleum Science and Technology, 2016. 34(5): p. 429-436.
  35. Corredor, L.M., M.M. Husein, and B.B. Maini, Impact of PAM-grafted nanoparticles on the performance of hydrolyzed polyacrylamide solutions for heavy oil recovery at different salinities. Industrial & Engineering Chemistry Research, 2019. 58(23): p. 9888-9899.
  36. Green, D. and G. Willhite, Enhanced Oil Recovery, vol. 6. Henry L. Doherty Memorial Fund of AIME, Society of Petroleum Engineers, Richardson, TX, pp. 143e154. 1998.
  37. Taylor, K.C. and H.A. Nasr-El-Din, Water-soluble hydrophobically associating polymers for improved oil recovery: A literature review. Journal of Petroleum Science and Engineering, 1998. 19(3-4): p. 265-280.
  38. Zeyghami, M., R. Kharrat, and M.H. Ghazanfari, Investigation of the applicability of nano silica particles as a thickening additive for polymer solutions applied in EOR processes. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 2014. 36(12): p. 1315-1324.
  39. Gbadamosi, A.O., et al., Effect of aluminium oxide nanoparticles on oilfield polyacrylamide: Rheology, interfacial tension, wettability and oil displacement studies. Journal of Molecular Liquids, 2019. 296: p. 111863.
  40. Llanos, S.n., et al., Effect of sodium oleate surfactant concentration grafted onto SiO2 nanoparticles in polymer flooding processes. ACS omega, 2018. 3(12): p. 18673-18684.
  41. Orodu, K.B., et al., Effect of aluminum oxide nanoparticles on the rheology and stability of a biopolymer for enhanced oil recovery. Journal of Molecular Liquids, 2019. 288: p. 110864.
  42. Druetta, P. and F. Picchioni, Polymer and nanoparticles flooding as a new method for Enhanced Oil Recovery. Journal of petroleum science and engineering, 2019. 177: p. 479-495.
  43. Gupta, R. and K.K. Mohanty, Temperature effects on surfactant-aided imbibition into fractured carbonates. SPE Journal, 2010. 15(03): p. 588-597.
  44. Zeynali, M.E. and A. RABIEI, Alkaline hydrolysis of polyacrylamide and study on poly (acrylamide-co-sodium acrylate) properties. 2002.
  45. Jamshidi, H. and A. Rabiee, Synthesis and characterization of acrylamide-based anionic copolymer and investigation of solution properties. Advances in Materials Science and Engineering, 2014. 2014.
  46. Rabiee, A., et al., Preparation and Characterization of Hybrid Nanocomposite of Polyacrylamide/Silica-Nanoparticles. Science and Technology, 2013. 25(5): p. 405-414.
Journal of Oil, Gas and Petrochemical Technology
Volume 10, Issue 2
August 2023
Pages 110-124